Dexter® Pre-Greased Easy Assemble 5 on 4-1/2" Hub and Drum Nev-R-Adjust Electric Brake Kit for 3,500 lbs. Trailer Axle - PGBK545ELEAUTO

From a novice to an expert in trailer repair, make life easy with the pre-greased easy to install trailer hub and drum from Dexter®.  The experts at Dexter® Axle have already prepared the hub and drum to go on the trailer spindle smoothly.  Don't worry about where the seal, inner, and outer bearings go, it is already done for you with the exact amount of grease you need to run the trailer axle properly.  The kit comes with all the part you need to complete the installation no matter what type of spindle you have and to make installation easier the hub and drum comes with easy-to-read instructions. 

Pre-Greased Dexter 5 on 4-1/2" Hub-Drum with 10" x 2.25" Dexter Nev-R-Adjust electric trailer brakes.  For 3.5K axle, 5-4.5- BC, studded, 1/2"-20, 1.718" seal, greased with bearings, & E-Z Lube® Grease Caps. Includes Dexter 023-468-00 & 023-469-00 Nev-R-Adjust Electric trailer brakes. Only works on 3,500 lbs trailer axles with four-hole brake flange. Includes mounting hardware. These are fully assembled backing plates with shoes, springs, and magnets attached and ready to be mounted. The pair includes one left hand and one right hand brake assembly.

Bearings and seal come installed & pre-greased. They also included E-Z Lube & standard grease caps, spindle attachment hardware & lug nuts. 

Dx Part No	Quantity	Description
008-247-05	2	Hub & Drum,3.5K, Cupped & Studded
031-031-02	2	Bearing Cone L44649
031-033-02	2	Bearing Cone L68149
010-019-00	2	Seal, 1.72"
006-080-00	10	Nut, Cone 60-Deg
021-003-00	2	Grease Cap
021-041-01	2	Grease Cap
085-001-00	2	Rubber Plug
006-190-00	2	Nut, Retainer
006-191-00	2	Nut, Hex
005-023-00	2	Washer, "D"
005-027-00	2	Washer
019-002-00	2	Cotter Pin
059-831-00	2	Instruction Sheet
006-176-00	2	Nut, Slotted
023-468-00	1	10" x 2 1/4" 3.5K Electric LH
023-469-00	1	10" x 2 1/4" 3.5K Electric RH
716LW	8	7/16" Lock Washer
716NFN	8	7/16" Fine Nut